I’ve taken the opportunity of a quiet space to extract some data over a 4-hour time range (and at 0.1 second cadence) to compile the following trend:
Unfortunately:
our ‘Device 2’ location was temporarily offline (following some power outages following Brisbane storms at the time)
so we had to revert back to the new ‘Device 1’ location … which (as noted on the image) we have observed appears to suffer from occasional noise (perhaps related to local intermittent power quality issues?).
So in the chart above we can’t really trust the specific details of the depth of the frequency drop, other than to note that the low point will have been around ~17:01 (NEM time) on Thursday 30th October 2025.
That should be enough for us to explore in a bit more detail….
Paul was one of the founders of Global-Roam in February 2000. He is currently the CEO of the company and the principal author of WattClarity. Writing for WattClarity has become a natural extension of his work in understanding the electricity market, enabling him to lead the team in developing better software for clients.
Before co-founding the company, Paul worked as a Mechanical Engineer for the Queensland Electricity Commission in the early 1990s. He also gained international experience in Japan, the United States, Canada, the UK, and Argentina as part of his ES Cornwall Memorial Scholarship.
Looking back at system frequency, we see a noticeable drop in system frequency around ~15:45 (NEM time) on Saturday 5th October 2024.
(a) There’s no large trip of a coal unit that coincides
(b) But it *might be* the result of a large collective under-performance (relative to Target) across the Semi-Scheduled fleet NEM-wide ?
Taking a quick look – after our ez2view ‘Notification’ widget triggered an alert for what appears to be Callide C4 tripping from close to full load (Sunday 9th November 2025 at 21:26 NEM time)
Here’s the raw hz data from Melbourne. 49.84hz is the lowest I saw
https://www.dropbox.com/scl/fi/x1t4c6wku2fw6dt21c2m0/hz-data.csv?rlkey=vz5w7ppo8m8umf1md09jrelxw&dl=0 (note it also has noise but